forming press

This machine is made up by the aboard advance technical and combining our arts and crafts technical of manufacturing glaze roof  This machine is made up by the aboard advance technical and combining our arts and crafts technical of manufacturing glaze roof tiles, the capability of this machine is better than the same kinds of products aboard. The design is advanced, and the structure is object, and the outside is beautiful, and the capacity is bigger, and the quantity of the products is good, and the capability is stabilization and so on.

This machine can install and use alone, but it should need the manpower to install the adobe and remove the adobe, and it also can collocate automatism installing material fight and the removing adobe manipulator with the extruder and the cutter and the transporting adobe machine and the glaze tile transport line and so on to made up the glaze tile production line. It can not need the manpower to run completely.   

The working plate of this machine has six working procedures, (just as six turning wheels)the turning of the working plate, except the stair machine division and the orientation, it also set up one set of precision orientation structure, it can make sure the right orientation of the working plate mould when in the every rushing press process completely. The slipway of the upper mould is box structure; the touching length is big of the slipway orbit and the machine orbit. Every rush press of the upper mould, the working procedure has twice rushing press to the pug adobe, just as after the upper mould press the adobe to the true place, the upper mould rise 10mm, and made the pug adobe get the fill exit air, then the upper mould press the adobe to the true place, and back to the highest position, so the mould has the longer life, and the quantity of the pressed products is good.

This machine collocated one set of lubricate system, when the machine running, it can add oil lubricate automatism to all the bear weight bearing and the transmission gear wheel structure working orbit and so on

No	item	unit	number
1	general weight press	KN	600
2	working plate working number	set	6
3	working plate turning speed	Turn/min	2.5
4	working capacity	piece/min	15
5	motor power	KW	5.5
6	lubricate pump flow rate	ML/min	500
7	working plate size		632×450
8	upper mould stroke		150
9	the biggest higher of the open and closed		442
10	the least closed height		292
11	outside size	(L×W×H)	17232×1100×2463
12	whole set weight		5200

forming press